(1 customer review)

USD  263

1 BUSINESS DAY PROCESSING TIME. CUSTOMERS FROM THE WEST COAST WILL RECEIVE THEIR ORDER WITHIN 2 TO 4 DAYS, AND CUSTOMERS FROM THE EAST COAST WITHIN 5 TO 7 DAYS. WE SHIP ORDERS FROM OUR US WAREHOUSES IN CA OR TX, AND WE SHIP TO ALL STATES WITHIN THE USA, EXCLUDING PUERTO RICO AND HAWAII. WE ARE SOLARTEX USA, OUR AUTOMATED SHIPPING AND INVENTORY SYNC GUARANTEE EFFICIENCY AND PERFECTION.
SKU: CX1225 Categories: , Tags: ,
Share this product :

Description

Cotek CX1225 3-Stage Battery Charger 12VDC 25A

In a world where reliable power is essential, the Cotek CX1225 3-Stage Battery Charger stands out as the ultimate solution for charging your batteries efficiently and effectively. Engineered with advanced microprocessor control and packed with innovative features, this charger delivers unparalleled performance and versatility for all your power needs.

One of the standout features of the Cotek CX1225 is its universal AC input with active power factor correction (PFC), allowing it to accept a wide range of input voltages from 90V to 264V. This means whether you’re at home, on the road, or off the grid, you can count on the CX1225 to deliver consistent and reliable charging power.

Compatibility is key, and the Cotek CX1225 doesn’t disappoint. With support for lead-acid, Li-ion, Gel, and AGM batteries, it adapts to your specific battery type seamlessly, ensuring optimal charging performance every time. Plus, its 3-stage charging mode ensures thorough and efficient charging, extending the lifespan of your batteries and maximizing their performance.

Smart Features for Optimal Charging

The Cotek CX1225 is equipped with a host of smart features designed to enhance your charging experience. From voltage temperature compensation to two-stage fan speed control for energy-efficient operation, this charger prioritizes efficiency and reliability in every aspect of its design. The voltage temperature compensation ensures your batteries receive the perfect charge regardless of environmental conditions, while the fan speed control optimizes energy use, reducing waste and increasing efficiency.

Advanced Safety Features

Safety is paramount, and the Cotek CX1225 is engineered with multiple protection features to safeguard your batteries and equipment. With built-in safeguards against short circuits, overvoltage, over-temperature, and brown-outs, you can charge with peace of mind knowing that your batteries are protected from harm. These advanced safety features ensure the longevity of your batteries and prevent damage to your equipment, making the CX1225 a reliable choice for all your charging needs.

Ease of Installation and Use

Installation is a breeze thanks to its Type 1 indoor aluminum enclosure, providing durability and protection in any environment. The robust construction ensures that the charger can withstand various environmental conditions, making it suitable for both indoor and outdoor use. Additionally, with the optional remote controller CR-1, you can easily monitor and control your charging process from a distance, adding convenience to your power management setup.

Whether you’re a seasoned adventurer, a commercial operator, or a homeowner looking to power up your backup system, the Cotek CX1225 3-Stage Battery Charger is the perfect choice for all your charging needs. Reliable, efficient, and packed with features, it’s the ultimate solution for powering your batteries with confidence.

Why Choose Cotek CX1225?

Don’t settle for subpar charging solutions. Experience the difference with the Cotek CX1225 3-Stage Battery Charger and unlock the power of efficient charging today. This charger is not only versatile and reliable but also designed to maximize the lifespan and performance of your batteries. With its advanced features and robust construction, it’s a smart investment for anyone who relies on battery power.

The Cotek CX1225 is designed with the user in mind, offering easy installation, straightforward operation, and superior performance. Its universal AC input and wide voltage range make it suitable for use in various locations and applications, ensuring that you always have a reliable power source when you need it most.

In addition to its impressive functionality, the Cotek CX1225 is also built to last. Its durable aluminum enclosure protects against environmental factors, while its advanced safety features ensure that your batteries are protected against overcharging, overheating, and other potential hazards. Backed by Cotek’s reputation for quality and reliability, the CX1225 is the ultimate battery charging solution for any application.

Specifications

OUTPUT
Battery Type Lead Acid / Li-ion / Gel / AGM
Standard Boost Charge Voltage 14.4V / 14.7V (Select by S1-1)
Standard Float Charge Voltage 13.8V / 13.5V (Select by S1-2)
Main Rated Current 25A
Current Range 0 ~ 25A
Main Output 2
ESB Output 1
ESB Output Voltage / Current 13.8V / 2A
Battery Charging Mode 3 – stage charging capability (IUOU)
Single Output Current Limit 25A
INPUT
Voltage Range 90 ~ 264VAC (refer to de-rating curve)
Power Factor (Typ.) PF > 0.92 at full load
Frequency Range 47 ~ 63Hz
Efficiency (Typ.) at 230VAC 87%
AC Current (Typ.) 4.1 A / 100VAC, 1.8A / 240VAC
Leakage Current For earth < 1mA / 240VAC
PROTECTION
Short Circuit Current is reduced to < 1A continued 30sec. , fan will operate 30 seconds then turn off
Over Voltage 17.5V ±1%, Protection type: Shut down output (recovery after resetting AC power on)
Over Temperature – Charger Over Temperature 100 ±5°C detected by heat sink
– Battery Over Temperature 52 ±5°C (Optional device – COTEK temperature sensor), connect on CN3
– Protection type: Auto recovery after heat sink temperature goes down to 50°C
FUNCTION
Alarm Signal NC. / NO. Relay contact output (Please refer to page 5 Alarms Signal & Fan Control )
Power Mode Supply 13.2V Current limit output voltage
Temperature Compensation -10mV / 0.5°C with COTEK temperature sensor
Charging Sleep Mode By Remote Controller and S1-4 DIP switch (Please refer to page 4~5)
Remote Controller Support COTEK Remote Controller CR-1 setting Function (CN3 or CN4)
ENVIRONMENT
Working Temp. -20 ~ 60°C (refer to de-rating curve)
Working Humidity 20 ~ 90% RH non-condensing
Storage Temp., Humidity -40 ~ +85°C, 20 ~ 90% RH
Temp. Coefficient ±0.03% (0 ~ 50°C)
Vibration 10 ~ 500Hz, 2G 10min. / 1cycle period for 60min. each along X, Y, Z axes
SAFETY & EMC
Safety Standards Ul458 (only for CX1235/1250/1280), Certified EN 60335-1, EN 60335-2-29
Withstand Voltage I/P-O/P: 4242VDC, I/P-FG: 1768VDC, O/P-FG: 700VDC
Isolation Resistance I/P-O/P: 100M Ohms / 500VDC
EMC Standards – Certified EN 61204-3; EN 55014-1
– Certified EN 61000-3-2, -3-3; EN 61000-6-3
– Certified IEC 61000-4-2, 3, 4, 5, 6, 8, 11; EN 61000-6-1; EN 55014-2
OTHERS
Dimension (WxHxD) 9.56 x 7.2 x 2.83 in
Packing 3.74 lbs

Additional information

Weight 3.74 lbs
Dimensions 9.56 × 7.2 × 2.83 in

Brand

Cotek

WARRANTY & RETURN

WARRANTY AND RETURN POLICY

Thank you for choosing Solartex USA LLC. Please review our warranty and return policies below.

WARRANTY PERIOD

The warranty period varies between 1 to 25 years for different Solartex USA products. The warranty duration begins from the date of purchase by the original consumer. Proof of purchase, such as a sales receipt or other reasonable documentation, is required to establish the start date of the warranty.

LIMITED TO ORIGINAL CONSUMER BUYER

The warranty provided by Solartex USA LLC is limited to the original consumer purchaser and is non-transferable to subsequent owners.

EXCLUSIONS

Our warranty does not apply to products that have been:

  • Misused, abused, modified, or damaged by accident.
  • Used for purposes other than normal consumer use as specified in Solartex USA LLC’s product literature.
  • Repaired by unauthorized personnel or facilities.

Any modified products received for warranty claims will be returned at the customer’s expense.

REPLACEMENTS

Solartex USA LLC will replace any product that fails to operate within 30 days. The replacement assumes the remaining warranty of the original product. If products appear faulty due to inappropriate operation, we can assist with issue resolution but don’t accept returns or replacements. Customers are responsible for accessory and shipping fees.

For damaged parts replacements, please contact us to arrange delivery of the replacement part (under warranty).

RETURN

Solartex USA LLC offers a 30-day money-back guarantee for goods purchased directly from Solartex USA LLC. If you’re not fully satisfied with your purchase, you may return the product within 30 days if it’s unused, undamaged, and unmodified. Return requests outside of 30 days require special authorization.

Before returning, please email in**@so******.co to contact our Customer Service Team.

REFUNDS

Once we receive and inspect your returned item, we’ll notify you of the approval or rejection of your refund. If approved, your refund will be processed to your original payment method within a certain timeframe.

If you have any questions, please email in**@so******.co.

ORDER CANCELLATION

Customers can request a full refund within 72 hours of placing an order by emailing Solartex USA LLC’s official store. If the product has already shipped, the customer will pay the shipping fee to return the package.

USED PRODUCTS

The warranty period for used products is one year. If a problem arises within 30 days naturally, Solartex USA LLC will cover shipping and repair fees. If a problem occurs within 1 year naturally, Solartex USA LLC will cover repair fees, and the customer covers shipping. Solartex USA LLC is not responsible for after-sale support of products purchased through channels other than those designated by Solartex USA LLC. Customers can purchase accessories from Solartex USA LLC, but after-sale support for accessories is not provided.

DATA SHEET

MANUAL

1 review for Cotek CX1225 3-Stage Battery Charger 12VDC 25A

  1. admin (store manager)

    Great AC DC Battery Charger, recommended

Add a review

Your email address will not be published. Required fields are marked *