Description
SmartSolar 200A Charger 450/200-Tr Victron
Using cutting-edge technology, SmartSolar maximizes the energy harvesting capability of a solar charge controller to intelligently achieve maximum charge in the shortest possible time. The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 200A depending on the model.
Ultra Fast MPPT
The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium, and others. The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device setup, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.
Remote Monitoring and Control
The SmartSolar charger allows for remote monitoring and control via the VictronConnect App, enabling easy setup and management of your solar system. It displays key information such as battery voltage, current, PV voltage, and historical data, ensuring you have all the information needed to optimize your system’s performance.
Daisy Chain Additional Units
The VE.Can SmartSolar charger is equipped with CAN bus ports, allowing communication with additional VE.Can SmartSolar chargers. These units can be “daisy-chained” using a single RJ45 cable, enabling synchronized charge stages across all connected chargers, enhancing efficiency and system performance.
Multiple Independent MPPT Tracking Inputs
With multiple MPPT trackers, you can optimize your solar panel design for maximum performance at your specific location. This feature ensures that each panel operates at its optimal power point, maximizing the energy harvested from your solar array.
Isolated PV Connections for Additional Safety
The MPPT RS SmartSolar charger provides full galvanic isolation between PV and battery connections, enhancing overall system safety. The charger continuously monitors the PV array and detects faults that reduce isolation to unsafe levels, ensuring peace of mind at higher voltages.
| Feature | Details |
|---|---|
| Battery Voltage | 48 V |
| Rated Charge Current | 200 A |
| Maximum Charge Power | 11.5 kW at 57.6 V |
| Charge Voltage ‘Absorption’ | Default setting: 57.6 V (adjustable) |
| Charge Voltage ‘Float’ | Default setting: 55.2 V (adjustable) |
| Programmable Voltage Range | 36 V – 60 V |
| Charge Algorithm | Multi-stage adaptive (adjustable) |
| Battery Temperature Sensor | Included |
| Maximum Efficiency | 96 % |
| Self-consumption | 15 mA |
| Maximum DC PV Voltage | 450 V |
| Start-up Voltage | 120 V |
| MPPT Operating Voltage Range | 80 – 450 V |
| Number of Trackers | 4 |
| Max. PV Operational Input Current | 18 A per tracker |
| Max. PV Short Circuit Current | 20 A per tracker |
| Max. DC Output Charging Power | 4000 W per tracker, 11520 W total |
| Maximum PV Array Size per Tracker | 7200 Wp (450 V x 20 A) |
| PV Isolation Fail Level | 100 kΩ |
| Synchronized Parallel Operation | Yes, up to 25 units with VE.Can |
| Programmable Relay | Yes |
| Protection | PV reverse polarity, Output short circuit, Over temperature |
| Data Communication | VE.Direct port, VE.Can port & Bluetooth |
| Bluetooth Frequency | 2402 – 2480 MHz |
| Bluetooth Power | 4dBm |
| General Purpose Analogue/Digital In Port | Yes, 2x |
| Remote On-Off | Yes |
| Operating Temperature Range | -40 to +60 °C (fan assisted cooling) |
| Humidity (non-condensing) | max 95 % |
| Material & Colour | Steel, blue RAL 5012 |
| Protection Category | IP21 |
| Battery Connection | M8 bolts |
| Power Terminals PV Input (-Tr version) | 2 x 16 mm² |
| Power Terminals PV Input (MC4 version) | 1 pair of male and female MC4 connectors per tracker |
| Weight | 13.7 kg |
| Dimensions (h x w x d) in mm | 487 x 434 x 146 |
| Safety Standards | EN-IEC 62109-1, EN-IEC 62109-2 |
| Country of Origin | Designed in The Netherlands, made in India |
admin (store manager) –
Great Controller, recommended