Description
Victron SmartSolar MPPT 150/100-Tr VE.Can
Harness the sun’s power with the SmartSolar MPPT 150/100-Tr VE.Can. Using cutting-edge technology, it maximizes energy collection, ensuring a swift charge and preserving battery life. It’s even capable of reviving deeply depleted batteries, operating efficiently down to 0 Volts, provided there’s no permanent damage.
Efficient Energy Harvesting
Continuously monitors your solar (PV) panel’s voltage and current output, ensuring that every bit of available power is efficiently stored. This advantage shines through, especially on partly cloudy days when light conditions fluctuate.
Seamless Remote Control and Monitoring
Take charge from anywhere with built-in Bluetooth connectivity. Pair your SmartSolar MPPT charger with your smartphone or device via VictronConnect. If you’re connected to the internet, the Victron Remote Management Portal (VRM) grants you access to your MPPT’s full capabilities, all at no cost. For remote installations in areas with no internet or phone signal, the GlobalLink 520 lets you monitor and control your MPPT. Consider adding the SmartSolar Control Display for quick, real-time status checks and simplified setup. Just plug it into your MPPT charger for instant monitoring and configuration capabilities.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding Conversion Efficiency
No cooling fan. Maximum efficiency exceeds 98 %.
The SmartSolar MPPT 150/100-Tr VE.Can comes equipped with extensive electronic protection, including over-temperature protection and power derating when the temperature is high. It also provides PV short circuit and PV reverse polarity protection, ensuring safe and reliable operation.
Bluetooth Smart is built-in, providing a wireless solution to set-up, monitor, update, and synchronize SmartSolar Charge Controllers. The internal temperature sensor and optional external battery voltage, temperature, and current sensing via Bluetooth ensure optimal performance and protection.
VE.Can allows for up to 25 units to be synchronized with VE.Can, and up to 10 units with Bluetooth, providing a scalable solution for larger installations. The remote on-off feature can connect to a VE.BUS BMS, enabling seamless integration with existing systems.
The SmartSolar MPPT 150/100-Tr VE.Can includes a programmable relay that can be set to trip on an alarm or other events, providing additional flexibility and control. For added convenience, consider the optional SmartSolar pluggable LCD display, which can be easily attached to the front of the controller for real-time monitoring and configuration.
| Feature | Details |
|---|---|
| Battery Voltage | 12/24/48 V Auto Select (36 V manual) |
| Rated Charge Current | 100 A |
| Nominal PV Power, 12V | 1450 W |
| Nominal PV Power, 24V | 2900 W |
| Nominal PV Power, 36V | 4350 W |
| Nominal PV Power, 48V | 5800 W |
| Max. PV Short Circuit Current | 70 A (max 30 A per MC4 conn.) |
| Maximum PV Open Circuit Voltage | 150 V absolute maximum coldest conditions, 145 V start-up and operating maximum |
| Maximum Efficiency | 98 % |
| Self-Consumption | Less than 35 mA @ 12 V / 20 mA @ 48 V |
| Charge Voltage ‘Absorption’ | Default setting: 14.4 / 28.8 / 43.2 / 57.6 V (adjustable via rotary switch, display, VE.Direct or Bluetooth) |
| Charge Voltage ‘Float’ | Default setting: 13.8 / 27.6 / 41.4 / 55.2 V (adjustable via rotary switch, display, VE.Direct or Bluetooth) |
| Charge Voltage ‘Equalization’ | Default setting: 16.2 / 32.4 / 48.6 / 64.8 V (adjustable) |
| Charge Algorithm | Multi-stage adaptive (eight preprogrammed algorithms or user-defined algorithm) |
| Temperature Compensation | -16 mV / -32 mV / -64 mV / °C |
| Protection | PV reverse polarity, Output short circuit, Over temperature |
| Operating Temperature | -30 to +60 °C (full rated output up to 40 °C) |
| Humidity | 95 %, non-condensing |
| Maximum Altitude | 5000m (full rated output up to 2000m) |
| Environmental Condition | Indoor, unconditioned |
| Pollution Degree | PD3 |
| Data Communication | VE.Can, VE.Direct and Bluetooth |
| Remote On/Off | Yes (2 pole connector) |
| Programmable Relay | DPST AC rating: 240 VAC / 4 A, DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC |
| Parallel Operation | Yes, parallel synchronised operation with VE.Can (max. 25 units) or Bluetooth (max. 10 units) |
| Colour | Blue (RAL 5012) |
| PV Terminals | 35 mm² / AWG2 (Tr models), Three pairs of MC4 connectors (MC4 models) |
| Battery Terminals | 35mm² / AWG2 |
| Protection Category | IP43 (electronic components), IP22 (connection area) |
| Weight | 4.5 kg |
| Dimensions (h x w x d) in mm | Tr models: 216 x 295 x 103, MC4 models: 246 x 295 x 103 |
| Safety Standards | EN/IEC 62109-1, UL 1741, CSA C22.2 |
| Data Stored | Battery voltage, current and temperature, as well as load output current, PV voltage and PV current |
| Number of Days Trends Data is Stored | 46 |
admin (store manager) –
Great Controller, recommended