Description
OutBack Power FLEXMax 60 MPPT Controller
Introduction
Introducing the OutBack Power FLEXMax 60 MPPT Controller, the pinnacle of solar charge controller innovation. Engineered with the latest in Maximum Power Point Tracking (MPPT) technology, this controller stands as a beacon of efficiency and performance in the renewable energy landscape.
Revolutionary MPPT Technology
Maximize Energy Harvest
At its core lies the groundbreaking FLEXmax MPPT software algorithm, a continuous and active system that boosts photovoltaic array power yield by up to 30% compared to conventional controllers. This translates to unparalleled energy harvest, ensuring every ray of sunlight is harnessed to its fullest potential.
Robust Performance in Diverse Conditions
Reliable Operation in Extreme Environments
The FLEXmax 60 doesn’t just stop at superior power optimization; it thrives in diverse environments with its active cooling and intelligent thermal management system. Capable of operating at full 60 Amps even in scorching ambient temperatures of up to 104°F (40°C), it ensures uninterrupted performance when you need it most.
Effortless Monitoring and Management
Real-Time Data Access
Equipped with a built-in, backlit 80-character display, monitoring and managing your system is effortless. Instantly check current status and review system performance data for the last 128 days with just the touch of a button. This level of insight empowers users to fine-tune their setups for optimal efficiency and performance.
Seamless Integration
Networked Control and Monitoring
But the FLEXmax 60 isn’t just a standalone unit; it’s designed for seamless integration into larger systems. Integrated OutBack network communications enable remote programming and monitoring via a MATE system display, offering unparalleled control and oversight from anywhere.
Versatile and Compatible
Flexible System Compatibility
What sets the FLEXmax 60 apart is its versatility. Supporting a wide range of nominal battery voltages, it accommodates various setups and configurations with ease. Additionally, its ability to step-down higher voltage solar arrays to recharge lower voltage battery banks ensures compatibility across different systems.
Lithium Battery Compatibility
Optimized for Lithium Systems
For those concerned about compatibility with lithium batteries, worry not. The FLEXmax 60 is fully compatible with select lithium battery brands, with white-listed options ensuring seamless integration and optimal performance. With OutBack Power’s meticulous attention to detail, you can trust that your system is in safe hands.
Conclusion
In conclusion, the OutBack Power FLEXMax 60 MPPT Controller is the epitome of high-performance, efficiency, and versatility in solar charge controllers. Whether you’re an off-grid enthusiast, a commercial installer, or a renewable energy pioneer, this controller is the ultimate choice for powering your advanced energy systems.
Specifications
| Feature | Specification |
|---|---|
| Nominal Battery Voltages | 12, 24, 36, 48, or 60VDC (Single model, selectable via field programming at start-up) |
| Maximum Output Current | 60A @ 104°F (40°C) with adjustable current limit |
| NEC Recommended Solar Maximum Array STC Nameplate | 12VDC systems: 750W / 24VDC systems: 1500W / 48VDC systems: 3000W / 60VDC systems: 3750W |
| PV Open Circuit Voltage (VOC) | 150VDC absolute maximum coldest conditions / 145VDC start-up and operating maximum |
| Standby Power Consumption | Less than 1W typical |
| Power Conversion Efficiency | 98.1% @ 60ADC in a 48VDC System (typical) |
| Peak Efficiency | 68VDC input w/48V battery at 52.8VDC (98.31%) |
| Charging Regulation | Bulk, absorption, float, silent and equalization |
| Voltage Regulation Set points | 13 to 80VDC user adjustable with password protection |
| Equalization Charging | Programmable voltage setpoint and duration, automatic termination when completed |
| Battery Temperature Compensation | Automatic with optional RTS installed / 5.0mV per °C per 2V battery cell |
| Voltage Step-Down Capability | Down convert from any acceptable array voltage to any battery voltage. Example: 72VDC array to 24VDC battery; 60VDC array to 48VDC battery |
| Programmable Auxiliary Control Output | 12VDC output signal which can be programmed for different control applications (maximum of 0.2ADC) |
| Status Display | 3.1” (8 cm) backlit LCD screen, 4 lines with 80 alphanumeric characters total |
| Remote Display and Controller | Optional MATE3, MATE or MATE2 |
| Network Cabling | Proprietary network system using RJ-45 modular connectors with CAT5 cable (8 wires) |
| Data Logging | Last 128 days of operation: amp-hours, watt-hours, time in float, peak watts, amps, solar array voltage, max. battery voltage, min. battery voltage and absorb time, accumulated amp-hours, and kWh of production |
| Operating Temperature Range | -40 to 60°C (power automatically derated above 40°C) |
| Environmental Rating | Indoor Type 1 |
| Conduit Knockouts | One 1” (25.4mm) on the back; One 1” (25.4mm) on the left side; Two 1” (25.4mm) on the bottom |
| Warranty | Standard 5-year / Available 10-year |
| Weight (lb/kg) | Unit: 11.65 / 5.3 / Shipping: 14.9 / 6.8 |
| Dimensions H x W x D (in/cm) | Unit: 13.75 x 5.75 x 4.5 / 35 x 14.6 x 11.4 / Shipping: 17 x 9.5 x 8.5 / 43.2 x 24.1 x 21.6 |
| Options | Remote Temperature Sensor (RTS), HUB4, HUB10, MATE, MATE2, MATE3 |
| Menu Languages | English & Spanish |
| Certifications | ETL Listed to UL1741, CSA C22.2 No. 107.1 |
admin (store manager) –
Great MPPT Solar Controller, recommended