Description
MidNite Solar CLASSIC 200 MPPT Charge Controller
Elevate your solar energy system to new heights with the MidNite Solar CLASSIC 200 MPPT Charge Controller. Engineered to deliver unparalleled performance and reliability, this controller empowers you to harness the full potential of renewable energy sources with ease and efficiency.
Designed for versatility, the CLASSIC 200 is equipped with advanced features tailored to meet the diverse needs of solar, wind, and hydro power systems. With Solar, Hydro, and Wind Modes, you can optimize energy capture from your preferred renewable source, maximizing efficiency and minimizing waste.
At the core of the CLASSIC 200 lies robust performance and durability. With an operating voltage of 200 volts and a maximum output current of 79 amps, this controller ensures efficient energy conversion for battery systems ranging from 12 to 72 volts. Whether you’re powering a residential setup or a commercial project, the CLASSIC 200 delivers the reliability and performance you demand.
Unmatched Safety and Reliability
Certified for High Standards
Safety is paramount, and the CLASSIC 200 doesn’t disappoint. ETL listed to UL1741 and CSA standards, with a Type 1 environmental rating, this controller offers peace of mind, knowing it meets rigorous quality and safety requirements. Built-in Arc Fault and Ground Fault protection further enhance safety, minimizing the risk of electrical hazards and ensuring the integrity of your system.
Enhanced Monitoring and Control
Real-Time Data Access
Monitor your energy system with ease using the free MidNite Solar Local Application Software. Whether you’re at home or on the go, you can access real-time data and analytics, allowing you to track energy production, monitor system performance, and make informed decisions to optimize efficiency.
User-Friendly Interface
The CLASSIC 200 features an intuitive interface that simplifies system management. With clear graphical displays and easy-to-navigate controls, you can quickly configure and monitor your solar energy setup, ensuring that your system operates at peak efficiency.
HyperVOC Technology
Performance in Any Condition
HyperVOC technology sets the CLASSIC 200 apart, extending VOC limits when needed to ensure optimal performance, even in challenging environmental conditions. Say goodbye to performance limitations and hello to unmatched reliability and efficiency, regardless of the weather or season.
Easy Installation and Integration
Flexible Integration Options
Installation is a breeze with the CLASSIC 200. Equipped with two auxiliary ports, it offers expanded functionality and connectivity options, enabling seamless integration with other components of your energy system. Plus, with comprehensive accessories included, from knock-out covers to a parts bag, everything you need is at your fingertips.
Built to Last
Backed by a robust 5-year warranty and manufactured in the USA, you can trust in the quality and durability of the CLASSIC 200. Listed by ETL for the US and Canada, CE certified, and FCC Class B listed, it meets the highest industry standards, guaranteeing a product you can rely on for years to come.
Unlock the full potential of your solar energy system with the CLASSIC 200 MPPT Charge Controller from MidNite Solar. Combining advanced technology, unmatched performance, and unrivaled reliability, it’s the ultimate solution for powering your renewable energy journey.
Technical Specifications
| CLASSIC 150, 200, 250 MPPT Charge Controllers | |
|---|---|
| Nominal Battery Voltage | 12 Through 72 volts on Classic’s |
| Maximum Output Current | 79A on 12V, 78A on 24V and 65A on 72V battery |
| PV Open Circuit Voltage VOC | Classic150 = 150V + HyperVOC (battery voltage up to 48V) Example 150V + 48V = 198VOC |
| Classic200 = 200V + HyperVOC (battery voltage up to 48V) | |
| Classic250 = 250V + HyperVOC (battery voltage up to 48V) (NOTE: See HyperVOC at bottom) | |
| Power Conversion Efficiency | 98% (Typical system) |
| Maximum Stand-By Self-Consumption (12V) | 2.8W – 4W |
| Reverse Current At Night | Zero – Internal relay for reverse current |
| Low Battery Voltage | Low Battery voltage disconnect and re-connect of loads fully programmable with 2 Auxiliary outputs to control external load disconnect / re-connect switches |
| HyperVOC | Standard all models – Extended VOC range for cold climates |
| Arc Fault Protection | Standard on Classic, 0.25 second detect and trip speed |
| Ground Fault Protection | Standard all models – resettable, no fuse to blow |
| Charging Regulation | Bulk, Absorb, Float as well as Equalization |
| Battery Voltage Regulation Set Points | 10-100VDC |
| Equalization Charging | Adjustable Voltage and Duration, Manual or Auto |
| PV Reverse Polarity | Protected to Max VOC (Classic MPPT Charger Controllers are fully protected from reverse current on both input and output) |
| Battery Reverse Polarity | Fully protected (Classic MPPT Charger Controllers are fully protected from reverse current on both input and output) |
| Battery Over Voltage | Fully protected (Classic MPPT Charger Controllers are fully protected from over current on both input and output) |
| Battery Short Circuit | Fully protected |
| Battery Temp Compensation | Automatic when BTS is installed, Adjustable mV per degree C per 2V cell |
| Programmable Auxiliary Control Output | 2 Auxiliary outputs, Aux1 can be 12V out or dry contact, Aux2 is 12V out or Logic IN |
| Graphic Display | Graphical display |
| Networking Cabling | Standard 4 conductor phone cable, no hub needed |
| Communications | ModBus openly published over Ethernet and RS232 |
| Remote Display | Display (MNGP) can be relocated and a second display can be added |
| Remote Monitoring And Control | Local Application software included allows viewing and control from the network or over the Internet. MyMidNite.com – online status monitoring |
| Terminal Rating | 75C |
| Internet Ready | All models |
| Data Logging | 380 days of daily history, 24 hours of data at 5 minute intervals |
| Wind And Hydro Applications | Standard on all models |
| Positive Ground Applications | Requires 2 pole input and output breakers |
| Operating Temperature | Minimum of -40C to 50C – Controller will auto derate as temperature rises above 25C |
| Environmental Rating | Indoor type IP30 (The Classic is IP22 Rated to 60529 when used with Classic Drip Shield) |
| Conduit knock Outs | Single 1″ conduit (35.05mm) on left and right sides. Two 1″ conduit (35.05mm) on bottom. Two 3/4″ conduit (27.76mm) on back. |
| Warranty | 5 Years |
| Weight & Dimensions | 12 Lbs. (5.45 kgs) – 14.9″ x 6″ x 4″ (378mm x 152mm x 102mm) |
| Shipping Dimensions HxWxD | 19″ x 8.5″ x 5.7″ (482.6mm x 215.9mm x 144.78mm) |
| Options | MNGP graphical display, 3ft networking cable |
| Certifications | Listed by ETL for US & Canada, CE Certified, FCC Class B |
admin (store manager) –
Great MPPT Solar Controller, recommended